Technical Specification
 |
|
| DIAGRAM OF G.I. PIPE |
| Code No. |
Length (L)
(mm) |
Outer Dia (D2)
(in mm) appox |
Internal Dia (D1)
(in mm) appox |
Internal
Copper Strips |
Terminal
(T1 & T2)
Point
(Dia mm) |
Pipe |
| Ash-19 |
2000 mm |
46-50 mm |
22-25 mm |
|
12 mm |
G.I. |
| Ash-19 |
3000 mm |
46-50 mm |
22-25 mm |
|
12 mm |
G.I. |
| Ash-39 |
2000 mm |
76-80 mm |
37-40 mm |
|
14 mm |
G.I. |
| Ash-39 |
3000 mm |
76-80 mm |
37-40 mm |
|
14 mm |
G.I. |
| Ash-50 |
2000 mm |
60-63 mm |
|
50×3 mm |
12 mm |
Copper |
| Ash-50 |
3000 mm |
60-63 mm |
|
50×3 mm |
12 mm |
Copper |
Note:
- Ash-19 Code No-we recommended this for LT application.
- Ash-39 Code No- we recommended this for HT application.
- Ash-50 Code No-where, only copper earthing is required.
|
| Primary
Conducting & Surface Area: |
- Ash gives maximum surface Area (in sq.mm.)
- Ash gives maximum cross sectional Primary conducting
Area (insq.mm.)
|
| Maximum
Surface Area (approx.) of Ash : |
| Ash-19 |
Ash-39 |
Ash-50 |
| L-2000 mm L-3000mm |
L-2000 mm L-3000 mm |
L-2000mm L-3000 mm |
| 3,14,000 sq.mm |
5,02,400 sq.mm |
3,95,640 sq.mm |
| 4,71,000 sq.m |
7,53,600 sq.mm |
5,93,460 sq.mm |
The above specification can be changed at any time for the development of the product
|
|
|
 |
